Ich stimme der Verwendung von Cookies zu. Auch wenn ich diese Website weiter nutze, gilt dies als Zustimmung.

Bitte lesen und akzeptieren Sie die Datenschutzinformation und Cookie-Informationen, damit Sie unser Angebot weiter nutzen können. Natürlich können Sie diese Einwilligung jederzeit widerrufen.





Altona Mining Limited: Weitere Fortschritte bei SRIG-Transaktion

Magazine aktuell


#gabb aktuell



01.02.2016, 43016 Zeichen

XX October 2010

 

Weitere Fortschritte bei SRIG-Transaktion

 

-          SRIG-Transaktion: Altona und Sichuan Railway Investment Group („SRIG“) haben sich vorbehaltlich Konditionen zur Gründung eines Joint Venture geeinigt. SRIG wird dazu 214 Mio. USD (301 Mio. AUD*) in bar zum Projekt Cloncurry beitragen.

 

-          SRIGs Due Diligence weit fortgeschritten: SRIG hat eine weitere Ortsbesichtigung durchgeführt, Gespräche mit Regierungsvertretern und Due Diligence Beratern in Brisbane geführt und Bestätigungsbohrungen auf Little Eva niedergebracht. Die Bohrungen bestätigen das geologische Modell, wo die zwei Bohrungen niedergebracht wurden. Metallurgische Bestätigungsarbeiten sind im Laufen. SRIG zielt auf einen Abschluss der Due Diligence bis Ende Februar 2016.

 

-          Fortschritte bei Dokumentation: Die Parteien haben bei Verhandlungen über Zeichnungs-, Aktionärs- und Managementabkommen Fortschritte gemacht und visieren den Abschluss im März 2016 an. Genehmigungen der Aufsichtsbehörden werden folgen.

 

-          Vereinbartes Arbeitsprogramm im Laufen: Die Parteien vereinbarten ein Arbeitsprogramm, während die Due Diligence und die behördlichen Genehmigungen abgeschlossen werden. Auf Turkey Creek. Little Eva und Bedford wurden die Kernbohrungen zur Gewinnung metallurgischer Proben abgeschlossen.

 

-          Verlängerung der Minenlebensdauer: Auf Turkey Creek führte die Grubenoptimierung zu einer Verlängerung der Lebensdauer der Mine um ungefähr zwei Jahre. Der Entwurf und die Planung der Mine und der Infrastruktur wurden durchgeführt, um Turkey Creek in das Projekt zu integrieren und um eine Projektabänderung für die Umweltbehörde zu unterstützen.

 

-          Projekt Roseby South: Das 475 km2 große Projekt Roseby South (100 % Altona) grenzt unmittelbar an das Projekt Cloncurry. Die Geländeerkundung neuer Zielgebiete in Vorbereitung der Explorationsarbeiten im Jahre 2016 wurde abgeschlossen.

 

-          Konsolidierung der Liegenschaften: 18 verfallene Explorationsgenehmigungen (EPMs) auf Cloncurry und dem Projekt Roseby South wurden in diesem Quartal durch 4 neue Genehmigungen ersetzt.

 

-          Barguthaben: Zum 31. Dezember 2015 verfügte Altona über einen Barbestand von 43,6 Mio. AUD.

 

*angenommener AUD:USD Wechselkurs von 0,71.

.

Pressemitteilungen

 

Altona gab seit dem letzten Quartalsbericht 14 Pressemitteilungen bezüglich ihrer Aktivitäten heraus. Diese Pressemitteilungen geben eine detailliertere Beschreibung der Aktivitäten als dieser Bericht.

 

21.12.2015               Prospekt für Award-Plan für Angestellte

16.12.2015              Aktueller Stand der SRIG – Altona Transaktion

27.11.2015              Rücktritt von Peter Ingram

26.11.2015              Ergebnisse der Jahreshauptversammlung 2015

24.11.2015              Investorenpräsentation

20.11.2015              Ceasing to be a substantial holder

18.11.2015              Appendix 3Y

18.11.2015              Änderungen der Konditionen von AGM Resolution 2

4.11.2015              Becoming a substantial holder

3.11.2015              Becoming a substantial holder from MS

28.10.2015              Becoming a substantial holder

23.10.2015              Jahreshauptversammlung 2015

12.10.2015              Appendix 3B

 

SRIG Joint Venture

 

Wichtiges Joint Venture bekannt gegeben

Altona und SRIG haben am 26. Juni 2015 eine verbindliche Rahmenvereinbarung geschlossen. Die Vereinbarung unterliegt bestimmten Konditionen.

 

Die Parteien haben der Gründung eines amtlich eingetragenen Joint Ventures zugestimmt, welches Altonas Projekt Cloncurry im Nordwesten des australischen Bundesstaates Queensland umfassen wird. SRIG wird 214,46 Mio. USD investieren und eine 60-%-Beteiligung am Joint Venture haben. Altona wird zu 40 % an dem Joint Venture beteiligt sein und das Project Cloncurry, sowie 38 Mio. USD in bar in das Joint Venture einbringen.

 

Vollständige Finanzierung des Projekts

 

Der Barbetrag in Höhe von 252,46 Mio. USD, der von den Joint-Venture-Partnern eingebracht wird, entspricht 355 Mio. AUD bei einem Wechselkurs von AUD:USD 0,71 und wird die geschätzten Investitionskosten (294 Mio. AUD) für die Mine Little Eva übersteigen und eine beachtliche Rückstellung für Arbeitskapital und Kostenüberschreitungen bieten.

 

Die Transaktion bewertet das Projekt Cloncurry mit 105 Mio. USD, was dem Stand vor der Bargeldinvestition entspricht.

 

Anzahlung in Höhe von 2 Mio. USD erhalten

 

Altona erhielt eine Vertragserfüllungsgarantie von der Bank of China, die bestätigt, dass die gemäß der Rahmenvereinbarung SRIG notwendige Anzahlung in Höhe von 2 Mio. USD hinterlegt wurde und im Verzugsfall von SRIG als Zahlung an Altona vorgesehen ist.

 

Due Diligence im Laufen

 

Laut Rahmenvereinbarung führt SRIG jetzt eine von den chinesischen Behörden vorgeschriebene formelle Due Diligence (Prüfung mit gebührender Sorgfalt) durch. Dies schloss das Niederbringen von zwei Kernbohrungen auf Little Eva zur Bestätigung der Ressourcenschätzungen ein und ermöglichte metallurgische Bestätigungsarbeiten. Die Bohrarbeiten wurden im November 2015 abgeschlossen und metallurgische Testarbeiten sind im Laufen.

 

Mitglieder der SRIG-Geschäftsleitung führten weitere Ortsbesichtigungen durch und trafen sich in Brisbane mit technischen Due Diligence Beratern und Wirtschafts- sowie Rechtsberatern zu Gesprächen. SRIG traf sich ebenfalls mit Regierungsvertretern des australischen Bundesstaates Queensland.

 

Parallel zur Due Diligence finalisieren die Parteien die formelle Dokumentation, die Zeichnungs-, Aktionärs- und Managementabkommen einschließt. Über die Schlüsselpunkte dieser Dokumente haben sich die Parteien geeinigt und sie sind in der Rahmenvereinbarung eingeschlossen. Die Parteien visieren die Abwicklung der formellen Abkommen im März 2016 an.

 

Nach Abschluss der Due Diligence und Abwicklung der formellen Vereinbarungen wird SRIG die Genehmigungen der chinesischen (SASAC der Provinz Sichuan) und der australischen (FIRB) Wertpapieraufsichtsbehörden einholen. Dieser Vorgang kann bis zum Abschluss bis zu drei Monate in Anspruch nehmen.

 

Über SRIG

 

SRIG ist ein finanziell robuster Partner

 

SRIG wurde im Jahre 2009 gegründet und hat ihren Hauptsitz in Changdu im Südwesten Chinas. SRIG ist zu 100 % im Besitz der Provinzregierung von Sichuan. Das Hauptgeschäft des Konzerns ist der Straßen-, Brücken- und Eisenbahnbau und Verwaltungsbereiche. SRIG verfügte im Jahre 2014 über Vermögenswerte in Höhe von 26,8 Mrd. USD und hatte Einnahmen von über 6 Mrd. USD. Der Konzern hat über 20.000 Angestellte. SRIG hat seine Absicht signalisiert, sich in andere Branchen zu diversifizieren sowohl in China als auch auf internationaler Ebene.

 

CCXI, ein Moody’s Unternehmen, vergab an SRIG die Bewertung AA+ mit einem stabilen Ausblick auf eine Anleiheemission in 2014 in Höhe von ungefähr 320 Mio. USD. CCXI erwähnte SRIGs Expertise und hob hervor, dass SRIG das erste chinesische Unternehmen war, das sich einen Brückenkonstruktionsauftrag im Ausland (Norwegen) sicherte.

 

 

Unternehmen

 

Altona unterhält einen soliden Barbestand

 

Zum 31. Dezember 2015 verfügte Altona über ein Barguthaben von 43,6 Mio. AUD. Dies bietet Altona einen soliden Kassenbestand, die SRIG-Transaktion zu unterstützen. 

 

Folgend die Kassenbewegungen im Quartal:

 

              A$ (Millionen)

Anfangsbestand (1. Oktober 2015)              45,0

Exploration und Bewertung              (0,7)

Unternehmen einschl. Kosten SRIG-Transaktion              (0,9)

Zinsauszahlung und Sonstiges              0,2

Endbestand (30. Dezember 2015)               43,6

 

Die wichtigsten Assets des Unternehmens sind die Bergbaulizenzen und Liegenschaften im Bereich Cloncurry in Queensland. Das Projekt Cloncurry liegt innerhalb dieser Gebiete.

 

Fokus des Unternehmens liegt auf Entwicklung des Projekts Cloncurry

 

Altona hat mit Wirkung zur Jahreshauptversammlung am 26. November 2015 sein Board auf drei nicht geschäftsführende Direktoren und den Managing Director reduziert. Altona setzt zur Unterstützung der SRIG-Arbeitsprogramme Teilzeit-Subunternehmer ein, die auch bei SRIGs Due Diligence helfen. Altona bemüht sich darum, die Fachkenntnisse für den Abschluss der SRIG-Transaktion zu sichern, das Projekt Cloncurry zu leiten und die Aktiengesellschaft zu Minimalkosten zu unterhalten.

 

Während des Quartals wurde die Liquidierung von Altonas sich vollständig in Unternehmensbesitz befindlichen finnischen Tochtergesellschaft Vulcan Kotalahti Oy weitgehend abgeschlossen. Boliden behält eine Option auf die Projekte, die im Besitz einer anderen finnischen Tochtergesellschaft sind, die noch im Besitz der Altona ist.

 

Aktienpreisbewegung an der ASX

Quartalsbeginn              8,

Hoch              12,

Tief              8,

Quartalsende              11,

Durchschnittsvolumen              287.456

 

Kupferprojekt Cloncurry

 

Das Projekt Cloncurry bietet eine große Ressource von 287 Mio. Tonnen mit 0,6 % Kupfer, 0,04 g/t Gold für 1,65 Mio. Tonnen enthaltenes Kupfer und 0,4 Mio. Unzen Gold. Es liegt nahe zur Infrastruktur. Das Projekt befindet sich 90 km nordöstlich von Mt Isa und 11 km nördlich von MMGs Zinkmine Dugald River (1,2 Mrd. AUD).

 

Laut Planung wird das Kupfer-Gold-Projekt Little Eva die erste Minenentwicklung auf dem Kupferprojekt Cloncurry sein. Eine endgültige Machbarkeitsstudie (Definitive Feasibility Study, „DFS“) für Little Eva, die von Altona am 13. März 2014 bekannt gegeben wurde, erwartet die Konstruktion einer Tagebaugrube mit einer Kapazität von 7 Mio. Tonnen pro Jahr und eine Flotationsanlage, die pro Jahr 39.000 Tonnen Kupfer und 17.000 Unzen Gold über eine anfängliche Lebensdauer der Mine von 11 Jahren produzieren kann. Die wesentlichen Genehmigungen liegen vor.

 

Das Projekt befindet sich innerhalb gewährter Bergbaulizenzen. Es liegen ebenfalls Abkommen mit den Ureinwohnern und Umweltgenehmigungen („EA“) vor.

 

SRIGs Bohrungen im Rahmen der Due Diligence

 

SRIGs Zwillingsbohrungen bestätigen Ressourcenmodelle und geologische Modelle

 

SRIG brachte zur Verzwillingung bestehender Bohrungen Kernbohrungen mit einer Gesamtlänge von 480 m nieder. Eine Bohrung war 250 m tief und verzwillingte sowohl eine Kernbohrung als auch eine benachbarte RC-Bohrung in der zentralen mächtigen Zone der Lagerstätte. Die zweite Bohrung war 230 m tief und befand sich am Rand zu den geringeren Gehalten in der Lagerstätte.

 

Folgend die Ergebnisse:

 

von (Meter)              bis (Meter)              Abschnitt (Meter)              Kupfer (%)              Gold (g/t)

Ursprüngliche Kernbohrung LED535              0              156.7              156.7              0.57              0.07

Ursprüngliche RC -Bohrung

LER521                            0              157.0              157.0              0.45              0.06

SRIG Zwillingsbohrung

LED1006                            0              157.0              157.0              0.53              0.11

Ursprüngliche Bohrung

LER261                            0              228.0              228.0              0.20              0.06

SRIG Zwillingsbohrung

LED1007                            0              228.0              228.0              0.18              0.03

 

Sehen Sie bitte Appendix 1 für vollständige Einzelheiten der Bohrungen.

 

Die Zwillingsbohrung LED1006 fällt innerhalb des Bereichs, der von den benachbarten Kern- und RC-Bohrungen beschrieben wird und reflektiert die natürliche Varianz innerhalb der Lagerstätten. Die Zwillingsbohrungen bestätigten das geologische Modell und das Ressourcenmodell.

 

Vereinbartes Arbeitsprogramm

 

Altona und SRIG vereinbarten ein Arbeitsprogramm im Umfang von bis zu 2 Mio. USD, um das Projekt zu avancieren und instand zu halten, während SRIG die formelle Due Diligence durchführt und die Parteien verschiedene behördliche Genehmigungen einholen. Etwaige für Altona im Rahmen dieses Programms angefallene Kosten würden als ein Bargeldbeitrag zu Altonas Verpflichtungen gemäß der Rahmenvereinbarung gutgeschrieben.

 

Altona schätzt die Aufwendungen für diese Aktivitäten bis dato auf 1,3 Mio. AUD.

 

 

Abschätzung der Auswirkung von Turkey Creek

 

Die Arbeiten zur Eingliederung der jüngsten Entdeckung Turkey Creek in den Minenplan, einschließlich des Lageplans für die Tagebaugruben, der Abraumhalden und der Tailings Storage Facility („TSF“, Lagerplätze der Aufbereitungsrückstände) wurden abgeschlossen. Dies wird zur Entwicklung eines Änderungsantrags für die bestehende EA verwendet, der bei den Behörden eingereicht wird.

 

Bergbaustudien

 

Bergbaustudien deuten Möglichkeit für Wertsteigerung an

 

Die Lagerstätten, die Erzmaterial an die Mühle Little Eva liefern werden, sind Little Eva, Turkey Creek, Bedford, Lady Clayre und Ivy Ann. Im Jahre 2012 wurden diese Lagerstätten optimiert und die Entwürfe der Tagebaugruben angefertigt (ausgenommen die jüngste Entdeckung Turkey Creek). Neue Ressourcenmodelle und die Bergbaukosten der 2014 DFS wurden für eine neue Optimierung eingesetzt, die im Quartal abgeschlossen wurde. Die 2014 Kosten liegen bedeutend unter jenen, die in der früheren Optimierung verwendet wurden. Die anfänglichen Ergebnisse der neuen Optimierungen deuten das Potenzial für eine wesentliche Zunahme der Vorräte des Projekts an.

 

Die Studien konzentrieren sich jetzt auf die Umwandlung der Mineralressource in Turkey Creek in einen Erzvorrat und auf das Sammeln zusätzlicher Umweltdaten aus der neu festgelegten Anordnung der Abraumhalden und der zum Abbau gehörigen Infrastruktur. Die neuen Daten und die neue Anordnung der Mine werden für eine Aktualisierung des EA benötigt.

 

Bohrprogramme

 

Metallurgische Bohrungen im Laufen

 

Altona hat zur Sammlung von Bohrkernen für metallurgische Testarbeiten und Bestimmung der Abraumeigenschaften ein acht Bohrungen mit insgesamt 489 Bohrmetern umfassendes Kernbohrprogramm auf Turkey Creek, Little Eva und Bedford abgeschlossen. Die Probenentnahme aus den Bohrkernen ist im Laufen.

 

Zusätzlich zum Sammeln von Sulfidmaterial auf Turkey Creek für metallurgische Testarbeiten wurden Proben mit Oxidmaterial auf mehreren Lagerstätten für Testarbeiten entnommen, da Möglichkeit für eine beachtliche Wertsteigerung des Projekts Cloncurry besteht, falls die oxidische Vererzung in den Minenplan aufgenommen werden kann. Dieses Material ist nicht im DFS-Minenplan und wird auf Halde geschüttet, wenn es als Teil des Abraumabtrags zum Erreichen des Sulfiderzes abgebaut wird.

 

Konsolidierung der Liegenschaften

 

Explorations-lizenz erneuert

Im November 2015 wurden vier neue konsolidierte Explorationsgenehmigungen für Minerale (EPMs 5757, 25759, 25760 und 25761) vergeben. Diese Konsolidierung der 8 bestehenden abgelaufenen EPMs auf vier neue Liegenschaften vereinfacht und reduziert die Verwaltungskosten von Altonas Projekten Cloncurry und Roseby South und verlängert de Lebensdauer des Explorationspakets.

 

Die zuvor bestehenden EPMs, deren Rückgabe von der Vergabe der neuen EPMs abhängig war, wurden abgetreten.

 

Die Vergabe dieser Liegenschaften wurde durch den Abschluss eines neuen Zusatzabkommens die EPMs betreffend mit der Kalkadoon Native Tile Aboriginal Corporation RNTBC im Oktober 2015 erleichtert.

 

Projekt Roseby South

 

Roseby South ist ein strategisches, sich zu 100 % im Besitz befindliches Asset

 

Das Projekt Roseby South („Roseby South“) ist zu 100 % in Besitz von Altona und Altona ist der Betreiber des Projekts.

 

Roseby South grenzt an Altonas Kupferprojekt Cloncurry (100 % Altona). Roseby South ist nicht Teil der Rahmenvereinbarung mit SRIG.

 

Roseby South hat eine Grundfläche von 475 km2 und deckt den Ausläufer der aussichtsreichen Stratigrafie ab, die sowohl Altonas Kupferprojekt Cloncurry und MMG Limiteds Mine Dugald River beherbergt, die unmittelbar nördlich davon liegen.

 

Ein großes Vererzungssystem, das bei Companion auf dem Gelände des Projekts Roseby South identifiziert wurde, bietet eine kurzfristige Aussicht auf eine Ressourcendefinition. Die wichtigsten Ergebnisse der früheren Bohrungen schließen Folgendes ein:

 

-          26 m mit 0,68 % Kupfer, 0,25 g/t Gold aus 63 m Tiefe; einschließlich 15 m mit 1,15 % Kupfer und 0,41 g/t Gold.

 

-          34 m mit 0,75 % Kupfer, 0,21 g/t Gold aus 54 m Tiefe; einschließlich 4 m mit 1,86 % Kupfer und 0,21 g/t Gold.

 

Aussage der kompetenten Person und ASX-Konformität

 

Aussage der kompetenten Person: Die Informationen in dieser Pressemitteilung, die sich auf Explorationsziele, Explorationsergebnisse, Mineralressourcen oder Erzvorräte beziehen, basieren auf Informationen, die von Dr. Alistair Cowden BSc (Hons), PhD, MAusIMM, MAIG zusammengestellt wurden. Dr. Cowden ist ein Mitarbeiter des Unternehmens und verfügt über ausreichendes Wissen und Erfahrung über diesen hier vorliegenden Vererzungs- und Lagerstättentyp. Seine Tätigkeiten qualifizieren ihn als kompetente Person gemäß den Regeln des 2012 Edition of theAustralasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves“. Dr. Cowden stimmt den hier eingefügten Informationen, die auf seinen Informationen basieren, in Form und Kontext je nach Erscheinen zu.

 

Produktionsziel und Finanzprognose für das Projekt Little Eva: Die Informationen in dieser Pressemitteilung beziehen sich auf Informationen über das Produktionsziel und die Finanzprognose, die in der ASX-Pressemitteilung „Cost review Delivers Major Upgrade to Little Eva“ am 13. März 2014 bekannt gegeben wurden. Diese Pressemitteilung ist bei www.altonamining.com oder www.asx.com.au zu finden. Das Unternehmen bestätigt, dass alle wesentlichen Annahmen, die das Produktionsziel unterstützen und die auf diesem Produktionsziel basierenden Finanzprognosen, die in der oben genannten Pressemitteilung erwähnt werden, weiterhin gültig sind und sich nicht wesentlich geändert haben.

 

Kupfer-Äquivalent: Bei Anwendung bezieht sich der Kupfer-Äquivalent auf Kupfer im produzierten Konzentrat oder im Konzentrat einer geplanten Produktion. Es bezieht sich nicht auf den Metallgehalt der Insitu Ressourcen, Vorräte oder Bohrergebnisse. Der Kupfer-Äquivalentgehalt wird für den entsprechenden Vorrat unter Berücksichtigung des Kupfergehalts aus allen Metallen (NSR) d. h. Kupfer, Zink, Gold und Silber berechnet.

 

 

ÜBER ALTONA

 

Altona Mining Limited (ASX: AOH) ist ein an der ASX notiertes Unternehmen, das finanziell gut aufgestellt ist und Dividenden zahlt. Altona konzentriert sich jetzt auf das Projekt Cloncurry in Queensland, Australien.

 

Das Kupferprojekt Cloncurry beherbergt Ressourcen, die ungefähr 1,65 Mio. Tonnen Kupfer und 0,41 Mio. Unzen Gold enthalten. Die erste vorgesehene Entwicklung ist die Kupfer-Gold-Tagebaumine und Aufbereitungsanlage Little Eva mit einer Kapazität von 7 Mio. Tonnen pro Jahr.

 

Little Eva ist genehmigt mit einer geplanten Jahresproduktion von 38.800 t Kupfer und 17.200 Unzen Gold über mindestens 11 Jahre. Eine endgültige Machbarkeitsstudie wurde im März 2014 veröffentlicht.

 

Altona hat eine Rahmenvereinbarung mit Sichuan Railway Investment Group zur vollständigen Finanzierung und Entwicklung von Little Eva geschlossen.

 

Die wichtigsten Zahlen Stand 31.12.2015;

 

Ausgeg. Aktien:              534.800.592

Ausgeg. Aktienrechte:              4.105.000

Barmittel:              A$43,6M

Aktienpreis:              11 Cent

Marktkapitalisierung:              A$59M

 

Altona Mining Limited

ACN: 090 468 018

Ground Floor, 1 Altona Street

West Perth Western Australia 6005

 

T:  +61 8 9485 2929

E:  altona@altonamining.com

W: www.altonamining.com

 

ASX:               AOH

 

Für weitere Informationen kontaktieren Sie bitte:                           

 

Alistair Cowden             

Managing Director             

Tel: +61 8 9485 2929             

altona@altonamining.com

 

James Harris

Professional Public Relations

Tel: +61 8 9388 0944

james.harris@ppr.com.au

             

Jochen Staiger

Swiss Resource Capital AG - Germany

Tel: +41 71 354 8501

js@resource-capital.ch

 

 

Für die Richtigkeit der Übersetzung wird keine Haftung übernommen! Bitte englische Originalmeldung beachten!

 

 

Appendix 1: SRIG Confirmatory Drilling

 

Part of the formal due diligence being undertaken by SRIG  included the drilling of two diamond drillholes at Little Eva and metallurgical testwork to validate the resource model and prior metallurgical recovery estimate. Metallurgical testwork is currently underway and drilling and assaying is complete.

 

The two holes drilled by SRIG were twins of two pre-existing Altona drillholes (one Diamond and one RC). The holes tested mineralisation in the core of the deposit and the lower grade margin of the deposit. Results from the new holes compare well with prior holes given the variation within the deposit (Table 1) and provide further confidence in and confirmation of prior drilling.

 

The distances between the SRIG holes and the twinned Altona holes varies from approximately 2 metres at the collar to 20 metres down hole.

 

Table 1:  Comparison of Significant Intersections (at 0.3% copper cut-off grade)

 

SRIG Twin Hole

Original Altona Hole

LED1006

LED535

From 0 metres:

157 metres at 0.53% copper, 0.11g/t gold

From 0 metres:

156.7 metres at 0.57% copper, 0.07g/t gold

 

 

 

LER521

 

From 0 metres:

157 metres at 0.45% copper, 0.06g/t gold

LED1007

LER261

From 0 metres:

228 metres at 0.18% copper, 0.03g/t gold

From 0 metres:

228 metres at 0.20% copper, 0.06g/t gold

 

SRIG hole LED1006 extended past the end of the twinned hole LED535 and intersected other modelled mineralised zones.

 

The results include the following highlights within broader mineralised zones:

 

LED1006:               From 79 metres                            6 metres at 0.99% copper, 0.13 g/t gold

              From 118 metres                            21 metres at 1.85% copper, 0.60g/t gold

              From 222 metres                             8 metres at 1.66% copper, 0.28g/t gold

 

LED1007:               From 43 metres                            5 metres at 2.38% copper, 0.28g/t gold

             

A full table of results and Altona’s standard sampling and assaying methodology are attached as Tables 2 to 4.

 


Table 2:  Significant Diamond Drill Core Intersections (at 0.3% copper cut-off grade)

 

Hole ID

        Depth

     Drill Intercept >0.3% Copper

From

To

Width

Copper

Gold

(metres)

(metres)

(metres)

(%)

(g/t)

LED1006

3

12

9

0.48

0.03

 

41

90

49

0.48

0.06

 

95

105

10

0.62

0.05

 

118

139

21

1.85

0.6

 

145

186

41

0.41

0.07

 

192

201

9

0.53

0.15

 

207

230

23

0.76

0.16

 

238

244

6

1.09

0.33

 

 

 

 

 

 

LED1007

31

48

17

1.05

0.22

 

96

104

8

0.29

0.06

 

177

182

5

0.29

0.08

 

 

 

 

 

 

Table 3:  Drillhole Summary Table

 

Hole ID

Hole Type

Location (MGA54)

Orientation

End of Hole

Easting

Northing

RL

Azimuth

Dip

Depth

(metres)

(metres)

(metres)

(°)

(°)

(metres)

SRIG Confirmatory Twin Holes - New

LED1006

Diamond

410569.2

7772193.0

162.2

81

-59.2

250.0

LED1007

Diamond

410751.9

7771867.8

168.5

80

-60.0

230.0

 

 

 

 

 

 

 

 

Twinned Altona Resource Hole - Previous

LED535

Diamond

410568.4

7772195.6

162.1

81

-60.0

156.7

LER521

RC

410565.7

7772191.8

161.8

81

-60.0

217.0

LER261

RC

410751.9

7771869.3

168.1

81

-60.0

229.0

 

Table 4:  Table 1 of the JORC Code

 

Criteria

Commentary

Section 1:  Sampling Techniques and Data

Sampling techniques

       Sampling was via diamond (DD) drill core. SRIG confirmation drilling core size was HQ. Core was measured and annotated for sampling by geologists contracted by SRIG (Mining One Pty Ltd) and independently validated by Altona staff on site. Core was cut and analysed at ALS laboratories in Townsville.  Half core was submitted for analysis; assay coarse reject and quarter core was sent for metallurgical testwork and remaining core retained and will be returned to Altona’s storage for reference.

Drilling techniques

       Diamond drilling; all holes HQ core. SRIG confirmation drilling was triple tubed.

       Holes twinned were diamond and RC; results reported previously.

Drill sample recovery

       Recovery was visually estimated and recorded. Core recoveries are considered to be excellent averaging well over 90%, generally 100%. Occasionally lower recoveries were recorded within the upper weathered zones.

       No significant changes in core recovery through the mineralised zones was recorded hence no subsequent bias to the grade.   

Logging

       Logging of the SRIG holes was completed by independent contractor geologists for SRIG (and subsequently validated by Altona staff) using industry standard logging procedures   consistent Altona standard procedures.

       Logging is qualitative and quantitative including, colour, lithology, mineralisation, alteration, sulphide and oxide mineralogy, sulphide and oxide amount, texture, grain size and structure.

       All holes were logged in full.

Sub-sampling techniques and sample preparation

       All samples were sent to ALS Laboratories in Townsville for cutting sample preparation and analysis. ALS is an independent commercial certified laboratory that uses industry standard sample preparation including drying, crushing and pulverisation.

       Half core was cut and submitted for analysis.

       Sample size is considered representative for typical copper mineralisation at Roseby area.     

Quality of assay data and laboratory tests

       All samples were analysed at ALS laboratories in Townsville.

       Samples were analysed using an Aqua Regia digest (method code: GEO-AR01) followed by ICPAES and ICP-MS analysis for 41 elements (method code: ME-MS41). This included copper, with a detection limit of 0.2 ppm. Data reported from Aqua Regia digestion should be considered as representing only the leachable portion of a particular analyte.

       On return of copper values >1% a second series of analyses were undertaken. This involved an ore grade Aqua Regia digestion (method code: ASY-AR01) followed by ICPAES analysis, optimised for accuracy and precision at high concentrations (method code: ME-OG46).

       Gold was analysed via a fire assay (30g) with an AAS finish, with a lower detection limit of 0.01 ppm and upper detection limit of 100 ppm.

       Quality Control by SRIG included: standards (certified reference materials, according to Altona’s normal procedures, inserted into the sampling sequence at 1:20 ratio and included representative material for copper, gold and blanks; and field duplicates taken using a for every 20th sample. Laboratory checks were also carried out on sample pulps. The standards were inserted into each sample batch to test the accuracy of the laboratory analysis.

       As yet Altona has not received the data for independent review.

       No samples were analysed by an umpire laboratory.

       No geophysical tools were used to determine the results reported here.

Verification of sampling and assaying

       Results were checked by several Altona personnel.

       The SRIG’s holes were twins of Altona resource definition holes.

       All field logging data was done on hardcopy with database entry by the SRIG contract geologist. The SRIG hole data was provide by SRIG to Altona for uploaded into the company Datashed database and validated by company database personnel.

       Drillhole assays were received in digital format from SRIG. Data was uploaded into the Altona Datashed database company database personnel. No manual data inserts took place.

       No adjustments have been applied to the results.

Location of data points

       Collar locations have been surveyed using the companies own DGPS with approximately 0.1 metre accuracy.

       Down hole surveys were completed at the end of each hole within drill rods by Altona personnel using non-magnetic Gyro tool for azimuth and dip.

       The Grid is GDA94 MGA Zone 54.

       Elevation accuracy of DGPS survey is considered to be less than 0.5m and has been verified against detailed ground survey previously completed in the area.

Data spacing and distribution

       Holes were largely drilled for confirmation/ due diligence purposes; one hole was drilled in the higher tenor Central Zone and one hole was drilled on the lower tenor margin of the Southern Zone.

       Drillholes being reported are from deposits with published resource estimate. Drill results are consistent with the existing drilling and resource estimate models.

Orientation of data in relation to geological structure

       The strike of mineralisation is either approximately NW-SE to N-S with predominantly westerly dips, with the exception of Northern Domain at Little Eva which dips to the NE.

       No bias is considered to result from drilling direction.

       The holes at Little Eva were drilled on the same grid orientation as the deposit resource definition drillholes and were designed to intersect the mineralised zones at an optimal angle.

Sample security

       Core samples were collected and stored in core trays in Altona facilities in Cloncury prior to the transport to Townsville. Packing and sampling was coordinated and supervised by SIG’s contractors.

       Following cutting by ALS, samples for analysis were collected into pre-numbered calico bags. Unique sample numbers were retained during the whole process.

Audits or reviews

       No external audits or review have been undertaken.

Section 2:  Reporting of Exploration Results

Mineral tenement and land tenure status

         The Little Eva deposit is within Altona Mining’s 100% owned Cloncurry Project Mining Leases 90162, 90163, 90164, 90165, and 90166.

         Altona announced in 2015 a Framework Agreement with Sichuan Railway Investment Group (SRIG) which, if completed, will lead to the forming of a 60:40 SRIG/Altona JV within the Cloncurry Project.

       There are agreements in place with the native title holders, the Kalkadoon people and with landholders.

       No significant historic sites or national parks are located within the reported exploration sites.

       The Mining Leases were granted in late 2012 and are in good standing.

Exploration done by other parties

       Extensive exploration programs and resource definition drilling has been carried out on the deposit by various companies commencing in the 1960’s; the majority of the work on the deposits was carried out by CRA Exploration,  Pasminco,  Universal Resources/Altona Mining and Xstrata.

Geology

       The Little Eva deposit - breccia, disseminated and shear hosted copper-gold mineralisation styles typical of the IOCG deposits in the region e.g. Ernest Henry. The deposits are considered to be hydrothermal and structurally controlled, with the different styles reflecting host rocks (competency, chemistry and permeability).

       At Little Eva the majority of the mineralisation is sulphide (chalcopyrite) with a shallow (10-25m thick) weathered/oxidised cap.

Drillhole Information

       Collar locations, elevations, azimuth, dip and lengths are presented in Table 3 of this release.

       Down hole widths of the mineralisation are presented in Table 2 of this release.

Data aggregation methods

       Standard intercepts were calculated using a 0.3% copper cut-off typical to the Roseby area mineralisation. A minimum of 4m intercepts are reported here and a maximum of consecutive 4m of below 0.3% samples were allowed within each intercepts.

       No equivalent calculations have been applied or used.

Relationship between mineralisation widths and intercept lengths

       At Little Eva drilling orientation is considered to be at a high angle or approximately perpendicular to the main orientation of the mineralisation resulting in unbiased widths.

Diagrams

       Tables 1 and 3.

Balanced reporting

       Best results for each hole have been reported in Table 1 including all significant results using the criteria described above. 

Other substantive exploration data

       Not applicable.

Further work

       Additional work in the future will consist of infill drilling for resource definition and mining grade control purposes.

 

 


QUARTERLY REPORT DECEMBER 2015

Table 1:  Resource Estimates for the Cloncurry Project

DEPOSIT

TOTAL

CONTAINED

METAL

MEASURED

INDICATED

INFERRED

Tonnes

Grade

Copper

Gold

Tonnes

Grade

Tonne

Grade

Tonnes

Grade

million

Cu

%

Au

g/t

tonnes

ounces

million

Cu

%

Au

g/t

million

Cu

%

Au

g/t

million

Cu

%

Au

g/t

COPPER GOLD DEPOSITS

Little Eva

105.9

0.52

0.09

546,000

295,000

37.1

0.60

0.09

45.0

0.46

0.08

23.9

0.50

0.10

Ivy AnnA

7.5

0.57

0.07

43,000

17,000

-

-

-

5.4

0.60

0.08

2.1

0.49

0.06

Lady ClayreA

14.0

0.56

0.20

78,000

85,000

-

-

-

3.6

0.60

0.24

10.4

0.54

0.18

BedfordA

1.7

0.99

0.20

17,000

11,000

-

-

-

1.3

1.04

0.21

0.4

0.83

0.16

    Sub-total

129.1

0.53

0.10

684,000

409,000

37.1

0.60

0.09

55.3

0.49

0.09

36.7

0.51

0.12

COPPER ONLY DEPOSITS

 

 

 

 

 

 

 

 

BlackardA

76.4

0.62

 

475,000

-

27.0

0.68

 -

6.6

0.60

 -

42.7

0.59

-

ScanlanA

22.2

0.65

 

143,000

-

-

-

 -

18.4

0.65

 -

3.8

0.60

-

Turkey Creek

21.0

0.59

 

123,000

-

-

-

 -

17.7

0.59

 -

3.4

0.58

-

LongamundiA

10.4

0.66

 

69,000

-

-

-

 -

-

-

 -

10.4

0.66

-

LegendA

17.4

0.54

 

94,000

-

-

-

 -

-

-

 -

17.4

0.54

-

Great SouthernA

6.0

0.61

 

37,000

-

-

-

 -

-

-

 -

6.0

0.61

-

CarolineA

3.6

0.53

 

19,000

-

-

-

 -

-

-

 -

3.6

0.53

-

Charlie BrownA

0.7

0.40

 

3,000

-

-

-

 -

-

-

 -

0.7

0.40

-

    Sub-total

157.7

0.61

 

963,000

-

27.0

0.68

 -

42.7

0.62

 -

88.1

0.59

-

TOTAL

286.8

0.57

0.04

1,647,000

409,000

64.1

0.63

0.05

98.0

0.55

0.05

124.8

0.57

0.04

This information was prepared and first disclosed under the JORC Code 2004 Edition. It has not been updated since to comply with the JORC Code 2012 on the basis that the information has not materially changed since it was last reported. All other resources classified and reported in accordance with JORC Code 2012 edition.

Note: Tonnages are dry metric tonnes and have been rounded, hence small differences may be present in the totals.

See ASX release of 23 October 2007 and 26 July 2011 (Longamundi, Great Southern, Caroline and Charlie Brown), 23 April 2012 (Bedford, Ivy Ann and Lady Clayre), 03 July 2012 (Blackard and Scanlan), 22 August 2012 (Legend), 27 May 2014 (Little Eva) and 18 March 2015 (Turkey Creek) for full details of resource estimation.  Little Eva is reported above a 0.2% copper lower cut-off grade, all other deposits are above 0.3% lower copper cut-off grade.

 

              13.


QUARTERLY REPORT DECEMBER 2015

The ASX releases referenced in Table 1 are available on the Altona website at www.altonamining.com.  The Company confirms that it is not aware of any new information or data that materially affects the information included in the most recent market announcement for each deposit and, in the case of Mineral Resources and Ore Reserves, that all material assumptions and technical parameters underpinning the estimates in the relevant market announcement continue to apply and have not materially changed.  The Company confirms that the form and context in which the Competent Person’s findings are presented have not materially modified from the original market announcement.

 

              19.


QUARTERLY REPORT DECEMBER 2015

 

APPENDIX 5B

Mining Exploration entity quarterly report

 

Name of entity

ALTONA MINING LIMITED

 

ABN                            Quarter ended (“current quarter”)

35 090 468 018

 

31 December 2015

 

Consolidated statement of cash flows

 

 

Cash flows related to operating activities

 

Current Quarter

(3 months)

A$’000

Year to Date

(6 months)

$A’000

1.1              Receipts from product sales and related debtors

              -

              -

 

 

 

1.2              Payments for              (a)              exploration and evaluation

              (676)

              (2,034)

                                          (b)              development

              -

              -

                                          (c)              production

              -

              -

                                          (d)              administration and corporate activities

              (945)

              (1,752)

1.3              Dividends received

              -

              -

1.4              Interest and other items of a similar nature received

              224

              547

1.5              Interest and other costs of finance paid

              (2)

              (3)

1.6              Income taxes rebate

              -

              -

1.7              Other*

              (10)

              (8)

 

 

 

              Net Operating Cash Flows

              (1,409)

              (3,250)

              Cash flows related to investing activities

 

 

1.8              Payment for purchases of:              (a)              prospects

              -

              -

                                          (b)              equity investments

              -

              -

                                          (c)              other fixed assets

              -

              -

1.9              Proceeds from sale of:              (a)              prospects

              -

              -

                                          (b)              equity investments

              -

              -

                                          (c)              other fixed assets

              -

              -

1.10              Loans to other entities

              -

              -

1.11              Loans repaid by other entities

              -

              -

1.12              Other

              -

              -

              Net investing cash flows

              -

              -

1.13              Total operating and investing cash flows (carried forward)

              (1,409)

              (3,250)

 

* Includes VAT/GST.


              Cash flows related to financing activities

 

 

1.14              Proceeds from issues of shares (net of costs)

              -

              -

1.15              Proceeds from sale of forfeited shares

              -

              -

1.16              Proceeds from borrowings

              -

              -

1.17              Repayment of borrowings

              -

              -

1.18              Dividends paid

              -

              -

1.19              Other

              -

              -

              Net financing cash flows

              -

              -

              Net increase (decrease) in cash held

              (1,409)

              (3,250)

1.20              Cash at beginning of quarter/year

              45,017

              46,838

1.21              Exchange rate adjustments to 1.20

              (13)

              7

1.22              Cash at end of quarter

43,595

43,595

 

 

Payments to directors of the entity and associates of the directors

Payments to related entities of the entity and associates of the related entities

 

Current quarter

$A’000

1.23              Aggregate amount of payments to the parties included in item 1.2

 

185

1.24              Aggregate amount of loans to the parties included in item 1.10

 

-

 

1.25              Explanation necessary for an understanding of the transactions

 

Payment of executive and non-executive directors’ fees, salaries and superannuation.

 

 

Non-cash financing and investing activities

 

2.1              Details of financing and investing transactions which have had a material effect on consolidated assets and liabilities but did not involve cash flows

 

N/A

 

2.2         Details of outlays made by other entities to establish or increase their share in projects in which the reporting entity has an interest

 

N/A


Financing facilities available

 

Add notes as necessary for an understanding of the position.

 

 

Amount available

$A’000

Amount used

$A’000

3.1              Loan facilities

-

-

3.2              Credit standby arrangements

-

-

 

 

Estimated cash outflows for next quarter (excluding any proceeds from concentrate sales and other income)

 

 

$A’000

4.1              Evaluation/Exploration

1,061

4.2     Development

-

4.3     Production

-

4.4     Administration and corporate activities

849

              Total

1,910

 

 

Reconciliation of Cash

 

Reconciliation of cash at the end of the quarter (as shown in the consolidated statement of cash flows) to the related items in the accounts is as follows.

Current

quarter

$A’000

Previous quarter

$A’000

5.1              Cash on hand and at bank

              300

              342

5.2              Deposits at call

              43,295

              44,675

5.3              Bank overdraft

              -

              -

5.4              Other (provide details)

              -

              -

              Total: cash at end of quarter (item 1.22)

              43,595

              45,017

 

 

Changes in interests in mining tenements

6.0              See attached Schedule A.


Issued and quoted securities at end of current quarter

 

 

Total number

Number quoted

Issue price per security

Amount paid up per security

7.1              Preference

              securities

              (description)

 

-

-

-

-

7.2          Changes during

              quarter

 

-

-

-

-

7.3              Ordinary

              securities

 

534,800,592

534,800,592

-

-

7.4              Changes during

              quarter

              -  Issued

 

-

-

-

-

7.5          Converting debt

              Securities

              (description and

              conversion factor)

 

-

-

-

-

7.6          Changes during

              quarter

 

-

-

-

-

7.7          Options

              (description and

              conversion factor)

 

 

 

4,105,000^

 

 

 

-

 

 

 

-

 

 

 

-

 

7.8              Issued during               quarter

 

-

-

-

-

7.9              Exercised during

              quarter

 

-

-

-

-

7.10              Expired during

              quarter

 

750,000^

-

 

-

 

 

-

 

7.11              Debentures

              (totals only)

 

-

-

-

-

7.12              Unsecured notes

              (totals only)

-

-

-

-

 

^               Share rights issued pursuant to approved Employee Share Scheme. These Share Rights form part of the Long Term Incentive Scheme in compliance with Altona’s Remuneration Policy. The Share Rights have various expiry dates and performance hurdles.

 


Compliance statement

 

1.             This statement has been prepared under accounting policies which comply with accounting standards as defined in the Corporations Act or other standards acceptable to ASX.

 

2.             This statement does give a true and fair view of the matters disclosed.

 

 

 

 

 

Sign here:                            Date: 29 January 2016

 

Company Secretary

 

Print Name:              Eric Hughes

 


SCHEDULE A

 

AUSTRALIAN MINING TENEMENTS

 

Interests in mining tenements relinquished, reduced or lapsed during the quarter

 

Conditionally surrendered in favour of new tenements: EPMs 8506, 10266, 12529, 14822, 8059, 12121, 12492, 12493, 13249, 14556, 18784, 18983, 9056, 14365, 14535, 10833, 11004 and 11611.

 

Interests in mining tenements acquired or increased during the quarter

 

New tenements replacing conditionally surrendered EPM’s:  EPMs 25757, 25760, 25759, 25761.

 

Interests in mining tenements at end of the quarter

 

The area under granted EPMs within Queensland presently totals 1252.3 km².

 

Cloncurry Project:  Mining Leases (ML)

Number

Name

Holder

Beneficial

Interest

Held

90162

Scanlan

Altona Mining Ltd / Roseby Copper Pty Ltd

100%

90163

Longamundi

Altona Mining Ltd / Roseby Copper Pty Ltd

100%

90164

Blackard

Altona Mining Ltd / Roseby Copper Pty Ltd

100%

90165

Little Eva

Altona Mining Ltd / Roseby Copper Pty Ltd

100%

90166

Village

Altona Mining Ltd / Roseby Copper Pty Ltd

100%

 

Exploration Permit for Minerals (EPM) Cloncurry Project

 

Number

Name

Holder

Beneficial

Interest Held

9611

Happy Valley

Roseby Copper (South) Pty Ltd

100%

14363

Bannockburn

Roseby Copper Pty Ltd

100%

14370

Malakoff

Roseby Copper (South) Pty Ltd

100%

14371

Mt. Angelay

Roseby Copper (South) Pty Ltd

100%

25757

Burke

Roseby Copper Pty Ltd

100%

25760

King

Roseby Copper Pty Ltd

100%

 

Exploration Permit for Minerals (EPM) Roseby South Project

 

Number

Name

Holder

Beneficial

Interest Held

25761

Wills

Roseby Copper (South) Pty Ltd

100%

25759

Gray

Roseby Copper (South) Pty Ltd

100%

 

Finnish Projects

Mining Licences/Mining Permits

Number

Name

Holder

Beneficial

Interest Held

K7802

Hautalampi

Vulcan Hautalampi Oy

100%

KL2015:0004

Särkiniemi

Vulcan Kotalahti Oy

100%

 

 

 

              19.



BSN Podcasts
Christian Drastil: Wiener Börse Plausch

SportWoche Podcast #106: Persönliches Fail-Fazit VCM und Staatsmeisterin Carola Bendl-Tschiedel über Rekordlerin Julia Mayer




 

Aktien auf dem Radar:Immofinanz, Polytec Group, Marinomed Biotech, Flughafen Wien, Warimpex, Lenzing, AT&S, Strabag, Uniqa, Wienerberger, Pierer Mobility, ATX, ATX TR, VIG, Andritz, Erste Group, Semperit, Cleen Energy, Österreichische Post, Stadlauer Malzfabrik AG, Addiko Bank, Oberbank AG Stamm, Agrana, Amag, CA Immo, EVN, Kapsch TrafficCom, OMV, Telekom Austria, Siemens Energy, Intel.


Random Partner

Palfinger
Palfinger zählt zu den international führenden Herstellern innovativer Hebe-Lösungen, die auf Nutzfahrzeugen und im maritimen Bereich zum Einsatz kommen. Der Konzern verfügt über 5.000 Vertriebs- und Servicestützpunkte in über 130 Ländern in Europa, Nord- und Südamerika sowie Asien.

>> Besuchen Sie 68 weitere Partner auf boerse-social.com/partner


Useletter

Die Useletter "Morning Xpresso" und "Evening Xtrakt" heben sich deutlich von den gängigen Newslettern ab. Beispiele ansehen bzw. kostenfrei anmelden. Wichtige Börse-Infos garantiert.

Newsletter abonnieren

Runplugged

Infos über neue Financial Literacy Audio Files für die Runplugged App
(kostenfrei downloaden über http://runplugged.com/spreadit)

per Newsletter erhalten


Meistgelesen
>> mehr





PIR-Zeichnungsprodukte
AT0000A39UT1
AT0000A2U2W8
AT0000A347X9
Newsflow
>> mehr

Börse Social Club Board
>> mehr
    BSN Vola-Event Siemens Energy
    #gabb #1589

    Featured Partner Video

    MMM Matejkas Market Memos #35: Gedanken über Europa, das man besuchen sollte, solange es noch steht

    Herzlich willkommen zu Triple M - Matejkas Market Memos Donnerstags auf Audio CD at. Heute macht sich Wolfgang Matejka Gedanken über Geier Sturzflug, die 1983 meinten, dass man Europa besuchen sol...

    Books josefchladek.com

    François Jonquet
    Forage
    2023
    Void

    Helen Levitt
    A Way of Seeing
    1965
    The Viking Press

    Dominic Turner
    False friends
    2023
    Self published

    Kurama
    erotiCANA
    2023
    in)(between gallery

    Tommaso Protti
    Terra Vermelha
    2023
    Void

    Altona Mining Limited: Weitere Fortschritte bei SRIG-Transaktion


    01.02.2016, 43016 Zeichen

    XX October 2010

     

    Weitere Fortschritte bei SRIG-Transaktion

     

    -          SRIG-Transaktion: Altona und Sichuan Railway Investment Group („SRIG“) haben sich vorbehaltlich Konditionen zur Gründung eines Joint Venture geeinigt. SRIG wird dazu 214 Mio. USD (301 Mio. AUD*) in bar zum Projekt Cloncurry beitragen.

     

    -          SRIGs Due Diligence weit fortgeschritten: SRIG hat eine weitere Ortsbesichtigung durchgeführt, Gespräche mit Regierungsvertretern und Due Diligence Beratern in Brisbane geführt und Bestätigungsbohrungen auf Little Eva niedergebracht. Die Bohrungen bestätigen das geologische Modell, wo die zwei Bohrungen niedergebracht wurden. Metallurgische Bestätigungsarbeiten sind im Laufen. SRIG zielt auf einen Abschluss der Due Diligence bis Ende Februar 2016.

     

    -          Fortschritte bei Dokumentation: Die Parteien haben bei Verhandlungen über Zeichnungs-, Aktionärs- und Managementabkommen Fortschritte gemacht und visieren den Abschluss im März 2016 an. Genehmigungen der Aufsichtsbehörden werden folgen.

     

    -          Vereinbartes Arbeitsprogramm im Laufen: Die Parteien vereinbarten ein Arbeitsprogramm, während die Due Diligence und die behördlichen Genehmigungen abgeschlossen werden. Auf Turkey Creek. Little Eva und Bedford wurden die Kernbohrungen zur Gewinnung metallurgischer Proben abgeschlossen.

     

    -          Verlängerung der Minenlebensdauer: Auf Turkey Creek führte die Grubenoptimierung zu einer Verlängerung der Lebensdauer der Mine um ungefähr zwei Jahre. Der Entwurf und die Planung der Mine und der Infrastruktur wurden durchgeführt, um Turkey Creek in das Projekt zu integrieren und um eine Projektabänderung für die Umweltbehörde zu unterstützen.

     

    -          Projekt Roseby South: Das 475 km2 große Projekt Roseby South (100 % Altona) grenzt unmittelbar an das Projekt Cloncurry. Die Geländeerkundung neuer Zielgebiete in Vorbereitung der Explorationsarbeiten im Jahre 2016 wurde abgeschlossen.

     

    -          Konsolidierung der Liegenschaften: 18 verfallene Explorationsgenehmigungen (EPMs) auf Cloncurry und dem Projekt Roseby South wurden in diesem Quartal durch 4 neue Genehmigungen ersetzt.

     

    -          Barguthaben: Zum 31. Dezember 2015 verfügte Altona über einen Barbestand von 43,6 Mio. AUD.

     

    *angenommener AUD:USD Wechselkurs von 0,71.

    .

    Pressemitteilungen

     

    Altona gab seit dem letzten Quartalsbericht 14 Pressemitteilungen bezüglich ihrer Aktivitäten heraus. Diese Pressemitteilungen geben eine detailliertere Beschreibung der Aktivitäten als dieser Bericht.

     

    21.12.2015               Prospekt für Award-Plan für Angestellte

    16.12.2015              Aktueller Stand der SRIG – Altona Transaktion

    27.11.2015              Rücktritt von Peter Ingram

    26.11.2015              Ergebnisse der Jahreshauptversammlung 2015

    24.11.2015              Investorenpräsentation

    20.11.2015              Ceasing to be a substantial holder

    18.11.2015              Appendix 3Y

    18.11.2015              Änderungen der Konditionen von AGM Resolution 2

    4.11.2015              Becoming a substantial holder

    3.11.2015              Becoming a substantial holder from MS

    28.10.2015              Becoming a substantial holder

    23.10.2015              Jahreshauptversammlung 2015

    12.10.2015              Appendix 3B

     

    SRIG Joint Venture

     

    Wichtiges Joint Venture bekannt gegeben

    Altona und SRIG haben am 26. Juni 2015 eine verbindliche Rahmenvereinbarung geschlossen. Die Vereinbarung unterliegt bestimmten Konditionen.

     

    Die Parteien haben der Gründung eines amtlich eingetragenen Joint Ventures zugestimmt, welches Altonas Projekt Cloncurry im Nordwesten des australischen Bundesstaates Queensland umfassen wird. SRIG wird 214,46 Mio. USD investieren und eine 60-%-Beteiligung am Joint Venture haben. Altona wird zu 40 % an dem Joint Venture beteiligt sein und das Project Cloncurry, sowie 38 Mio. USD in bar in das Joint Venture einbringen.

     

    Vollständige Finanzierung des Projekts

     

    Der Barbetrag in Höhe von 252,46 Mio. USD, der von den Joint-Venture-Partnern eingebracht wird, entspricht 355 Mio. AUD bei einem Wechselkurs von AUD:USD 0,71 und wird die geschätzten Investitionskosten (294 Mio. AUD) für die Mine Little Eva übersteigen und eine beachtliche Rückstellung für Arbeitskapital und Kostenüberschreitungen bieten.

     

    Die Transaktion bewertet das Projekt Cloncurry mit 105 Mio. USD, was dem Stand vor der Bargeldinvestition entspricht.

     

    Anzahlung in Höhe von 2 Mio. USD erhalten

     

    Altona erhielt eine Vertragserfüllungsgarantie von der Bank of China, die bestätigt, dass die gemäß der Rahmenvereinbarung SRIG notwendige Anzahlung in Höhe von 2 Mio. USD hinterlegt wurde und im Verzugsfall von SRIG als Zahlung an Altona vorgesehen ist.

     

    Due Diligence im Laufen

     

    Laut Rahmenvereinbarung führt SRIG jetzt eine von den chinesischen Behörden vorgeschriebene formelle Due Diligence (Prüfung mit gebührender Sorgfalt) durch. Dies schloss das Niederbringen von zwei Kernbohrungen auf Little Eva zur Bestätigung der Ressourcenschätzungen ein und ermöglichte metallurgische Bestätigungsarbeiten. Die Bohrarbeiten wurden im November 2015 abgeschlossen und metallurgische Testarbeiten sind im Laufen.

     

    Mitglieder der SRIG-Geschäftsleitung führten weitere Ortsbesichtigungen durch und trafen sich in Brisbane mit technischen Due Diligence Beratern und Wirtschafts- sowie Rechtsberatern zu Gesprächen. SRIG traf sich ebenfalls mit Regierungsvertretern des australischen Bundesstaates Queensland.

     

    Parallel zur Due Diligence finalisieren die Parteien die formelle Dokumentation, die Zeichnungs-, Aktionärs- und Managementabkommen einschließt. Über die Schlüsselpunkte dieser Dokumente haben sich die Parteien geeinigt und sie sind in der Rahmenvereinbarung eingeschlossen. Die Parteien visieren die Abwicklung der formellen Abkommen im März 2016 an.

     

    Nach Abschluss der Due Diligence und Abwicklung der formellen Vereinbarungen wird SRIG die Genehmigungen der chinesischen (SASAC der Provinz Sichuan) und der australischen (FIRB) Wertpapieraufsichtsbehörden einholen. Dieser Vorgang kann bis zum Abschluss bis zu drei Monate in Anspruch nehmen.

     

    Über SRIG

     

    SRIG ist ein finanziell robuster Partner

     

    SRIG wurde im Jahre 2009 gegründet und hat ihren Hauptsitz in Changdu im Südwesten Chinas. SRIG ist zu 100 % im Besitz der Provinzregierung von Sichuan. Das Hauptgeschäft des Konzerns ist der Straßen-, Brücken- und Eisenbahnbau und Verwaltungsbereiche. SRIG verfügte im Jahre 2014 über Vermögenswerte in Höhe von 26,8 Mrd. USD und hatte Einnahmen von über 6 Mrd. USD. Der Konzern hat über 20.000 Angestellte. SRIG hat seine Absicht signalisiert, sich in andere Branchen zu diversifizieren sowohl in China als auch auf internationaler Ebene.

     

    CCXI, ein Moody’s Unternehmen, vergab an SRIG die Bewertung AA+ mit einem stabilen Ausblick auf eine Anleiheemission in 2014 in Höhe von ungefähr 320 Mio. USD. CCXI erwähnte SRIGs Expertise und hob hervor, dass SRIG das erste chinesische Unternehmen war, das sich einen Brückenkonstruktionsauftrag im Ausland (Norwegen) sicherte.

     

     

    Unternehmen

     

    Altona unterhält einen soliden Barbestand

     

    Zum 31. Dezember 2015 verfügte Altona über ein Barguthaben von 43,6 Mio. AUD. Dies bietet Altona einen soliden Kassenbestand, die SRIG-Transaktion zu unterstützen. 

     

    Folgend die Kassenbewegungen im Quartal:

     

                  A$ (Millionen)

    Anfangsbestand (1. Oktober 2015)              45,0

    Exploration und Bewertung              (0,7)

    Unternehmen einschl. Kosten SRIG-Transaktion              (0,9)

    Zinsauszahlung und Sonstiges              0,2

    Endbestand (30. Dezember 2015)               43,6

     

    Die wichtigsten Assets des Unternehmens sind die Bergbaulizenzen und Liegenschaften im Bereich Cloncurry in Queensland. Das Projekt Cloncurry liegt innerhalb dieser Gebiete.

     

    Fokus des Unternehmens liegt auf Entwicklung des Projekts Cloncurry

     

    Altona hat mit Wirkung zur Jahreshauptversammlung am 26. November 2015 sein Board auf drei nicht geschäftsführende Direktoren und den Managing Director reduziert. Altona setzt zur Unterstützung der SRIG-Arbeitsprogramme Teilzeit-Subunternehmer ein, die auch bei SRIGs Due Diligence helfen. Altona bemüht sich darum, die Fachkenntnisse für den Abschluss der SRIG-Transaktion zu sichern, das Projekt Cloncurry zu leiten und die Aktiengesellschaft zu Minimalkosten zu unterhalten.

     

    Während des Quartals wurde die Liquidierung von Altonas sich vollständig in Unternehmensbesitz befindlichen finnischen Tochtergesellschaft Vulcan Kotalahti Oy weitgehend abgeschlossen. Boliden behält eine Option auf die Projekte, die im Besitz einer anderen finnischen Tochtergesellschaft sind, die noch im Besitz der Altona ist.

     

    Aktienpreisbewegung an der ASX

    Quartalsbeginn              8,

    Hoch              12,

    Tief              8,

    Quartalsende              11,

    Durchschnittsvolumen              287.456

     

    Kupferprojekt Cloncurry

     

    Das Projekt Cloncurry bietet eine große Ressource von 287 Mio. Tonnen mit 0,6 % Kupfer, 0,04 g/t Gold für 1,65 Mio. Tonnen enthaltenes Kupfer und 0,4 Mio. Unzen Gold. Es liegt nahe zur Infrastruktur. Das Projekt befindet sich 90 km nordöstlich von Mt Isa und 11 km nördlich von MMGs Zinkmine Dugald River (1,2 Mrd. AUD).

     

    Laut Planung wird das Kupfer-Gold-Projekt Little Eva die erste Minenentwicklung auf dem Kupferprojekt Cloncurry sein. Eine endgültige Machbarkeitsstudie (Definitive Feasibility Study, „DFS“) für Little Eva, die von Altona am 13. März 2014 bekannt gegeben wurde, erwartet die Konstruktion einer Tagebaugrube mit einer Kapazität von 7 Mio. Tonnen pro Jahr und eine Flotationsanlage, die pro Jahr 39.000 Tonnen Kupfer und 17.000 Unzen Gold über eine anfängliche Lebensdauer der Mine von 11 Jahren produzieren kann. Die wesentlichen Genehmigungen liegen vor.

     

    Das Projekt befindet sich innerhalb gewährter Bergbaulizenzen. Es liegen ebenfalls Abkommen mit den Ureinwohnern und Umweltgenehmigungen („EA“) vor.

     

    SRIGs Bohrungen im Rahmen der Due Diligence

     

    SRIGs Zwillingsbohrungen bestätigen Ressourcenmodelle und geologische Modelle

     

    SRIG brachte zur Verzwillingung bestehender Bohrungen Kernbohrungen mit einer Gesamtlänge von 480 m nieder. Eine Bohrung war 250 m tief und verzwillingte sowohl eine Kernbohrung als auch eine benachbarte RC-Bohrung in der zentralen mächtigen Zone der Lagerstätte. Die zweite Bohrung war 230 m tief und befand sich am Rand zu den geringeren Gehalten in der Lagerstätte.

     

    Folgend die Ergebnisse:

     

    von (Meter)              bis (Meter)              Abschnitt (Meter)              Kupfer (%)              Gold (g/t)

    Ursprüngliche Kernbohrung LED535              0              156.7              156.7              0.57              0.07

    Ursprüngliche RC -Bohrung

    LER521                            0              157.0              157.0              0.45              0.06

    SRIG Zwillingsbohrung

    LED1006                            0              157.0              157.0              0.53              0.11

    Ursprüngliche Bohrung

    LER261                            0              228.0              228.0              0.20              0.06

    SRIG Zwillingsbohrung

    LED1007                            0              228.0              228.0              0.18              0.03

     

    Sehen Sie bitte Appendix 1 für vollständige Einzelheiten der Bohrungen.

     

    Die Zwillingsbohrung LED1006 fällt innerhalb des Bereichs, der von den benachbarten Kern- und RC-Bohrungen beschrieben wird und reflektiert die natürliche Varianz innerhalb der Lagerstätten. Die Zwillingsbohrungen bestätigten das geologische Modell und das Ressourcenmodell.

     

    Vereinbartes Arbeitsprogramm

     

    Altona und SRIG vereinbarten ein Arbeitsprogramm im Umfang von bis zu 2 Mio. USD, um das Projekt zu avancieren und instand zu halten, während SRIG die formelle Due Diligence durchführt und die Parteien verschiedene behördliche Genehmigungen einholen. Etwaige für Altona im Rahmen dieses Programms angefallene Kosten würden als ein Bargeldbeitrag zu Altonas Verpflichtungen gemäß der Rahmenvereinbarung gutgeschrieben.

     

    Altona schätzt die Aufwendungen für diese Aktivitäten bis dato auf 1,3 Mio. AUD.

     

     

    Abschätzung der Auswirkung von Turkey Creek

     

    Die Arbeiten zur Eingliederung der jüngsten Entdeckung Turkey Creek in den Minenplan, einschließlich des Lageplans für die Tagebaugruben, der Abraumhalden und der Tailings Storage Facility („TSF“, Lagerplätze der Aufbereitungsrückstände) wurden abgeschlossen. Dies wird zur Entwicklung eines Änderungsantrags für die bestehende EA verwendet, der bei den Behörden eingereicht wird.

     

    Bergbaustudien

     

    Bergbaustudien deuten Möglichkeit für Wertsteigerung an

     

    Die Lagerstätten, die Erzmaterial an die Mühle Little Eva liefern werden, sind Little Eva, Turkey Creek, Bedford, Lady Clayre und Ivy Ann. Im Jahre 2012 wurden diese Lagerstätten optimiert und die Entwürfe der Tagebaugruben angefertigt (ausgenommen die jüngste Entdeckung Turkey Creek). Neue Ressourcenmodelle und die Bergbaukosten der 2014 DFS wurden für eine neue Optimierung eingesetzt, die im Quartal abgeschlossen wurde. Die 2014 Kosten liegen bedeutend unter jenen, die in der früheren Optimierung verwendet wurden. Die anfänglichen Ergebnisse der neuen Optimierungen deuten das Potenzial für eine wesentliche Zunahme der Vorräte des Projekts an.

     

    Die Studien konzentrieren sich jetzt auf die Umwandlung der Mineralressource in Turkey Creek in einen Erzvorrat und auf das Sammeln zusätzlicher Umweltdaten aus der neu festgelegten Anordnung der Abraumhalden und der zum Abbau gehörigen Infrastruktur. Die neuen Daten und die neue Anordnung der Mine werden für eine Aktualisierung des EA benötigt.

     

    Bohrprogramme

     

    Metallurgische Bohrungen im Laufen

     

    Altona hat zur Sammlung von Bohrkernen für metallurgische Testarbeiten und Bestimmung der Abraumeigenschaften ein acht Bohrungen mit insgesamt 489 Bohrmetern umfassendes Kernbohrprogramm auf Turkey Creek, Little Eva und Bedford abgeschlossen. Die Probenentnahme aus den Bohrkernen ist im Laufen.

     

    Zusätzlich zum Sammeln von Sulfidmaterial auf Turkey Creek für metallurgische Testarbeiten wurden Proben mit Oxidmaterial auf mehreren Lagerstätten für Testarbeiten entnommen, da Möglichkeit für eine beachtliche Wertsteigerung des Projekts Cloncurry besteht, falls die oxidische Vererzung in den Minenplan aufgenommen werden kann. Dieses Material ist nicht im DFS-Minenplan und wird auf Halde geschüttet, wenn es als Teil des Abraumabtrags zum Erreichen des Sulfiderzes abgebaut wird.

     

    Konsolidierung der Liegenschaften

     

    Explorations-lizenz erneuert

    Im November 2015 wurden vier neue konsolidierte Explorationsgenehmigungen für Minerale (EPMs 5757, 25759, 25760 und 25761) vergeben. Diese Konsolidierung der 8 bestehenden abgelaufenen EPMs auf vier neue Liegenschaften vereinfacht und reduziert die Verwaltungskosten von Altonas Projekten Cloncurry und Roseby South und verlängert de Lebensdauer des Explorationspakets.

     

    Die zuvor bestehenden EPMs, deren Rückgabe von der Vergabe der neuen EPMs abhängig war, wurden abgetreten.

     

    Die Vergabe dieser Liegenschaften wurde durch den Abschluss eines neuen Zusatzabkommens die EPMs betreffend mit der Kalkadoon Native Tile Aboriginal Corporation RNTBC im Oktober 2015 erleichtert.

     

    Projekt Roseby South

     

    Roseby South ist ein strategisches, sich zu 100 % im Besitz befindliches Asset

     

    Das Projekt Roseby South („Roseby South“) ist zu 100 % in Besitz von Altona und Altona ist der Betreiber des Projekts.

     

    Roseby South grenzt an Altonas Kupferprojekt Cloncurry (100 % Altona). Roseby South ist nicht Teil der Rahmenvereinbarung mit SRIG.

     

    Roseby South hat eine Grundfläche von 475 km2 und deckt den Ausläufer der aussichtsreichen Stratigrafie ab, die sowohl Altonas Kupferprojekt Cloncurry und MMG Limiteds Mine Dugald River beherbergt, die unmittelbar nördlich davon liegen.

     

    Ein großes Vererzungssystem, das bei Companion auf dem Gelände des Projekts Roseby South identifiziert wurde, bietet eine kurzfristige Aussicht auf eine Ressourcendefinition. Die wichtigsten Ergebnisse der früheren Bohrungen schließen Folgendes ein:

     

    -          26 m mit 0,68 % Kupfer, 0,25 g/t Gold aus 63 m Tiefe; einschließlich 15 m mit 1,15 % Kupfer und 0,41 g/t Gold.

     

    -          34 m mit 0,75 % Kupfer, 0,21 g/t Gold aus 54 m Tiefe; einschließlich 4 m mit 1,86 % Kupfer und 0,21 g/t Gold.

     

    Aussage der kompetenten Person und ASX-Konformität

     

    Aussage der kompetenten Person: Die Informationen in dieser Pressemitteilung, die sich auf Explorationsziele, Explorationsergebnisse, Mineralressourcen oder Erzvorräte beziehen, basieren auf Informationen, die von Dr. Alistair Cowden BSc (Hons), PhD, MAusIMM, MAIG zusammengestellt wurden. Dr. Cowden ist ein Mitarbeiter des Unternehmens und verfügt über ausreichendes Wissen und Erfahrung über diesen hier vorliegenden Vererzungs- und Lagerstättentyp. Seine Tätigkeiten qualifizieren ihn als kompetente Person gemäß den Regeln des 2012 Edition of theAustralasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves“. Dr. Cowden stimmt den hier eingefügten Informationen, die auf seinen Informationen basieren, in Form und Kontext je nach Erscheinen zu.

     

    Produktionsziel und Finanzprognose für das Projekt Little Eva: Die Informationen in dieser Pressemitteilung beziehen sich auf Informationen über das Produktionsziel und die Finanzprognose, die in der ASX-Pressemitteilung „Cost review Delivers Major Upgrade to Little Eva“ am 13. März 2014 bekannt gegeben wurden. Diese Pressemitteilung ist bei www.altonamining.com oder www.asx.com.au zu finden. Das Unternehmen bestätigt, dass alle wesentlichen Annahmen, die das Produktionsziel unterstützen und die auf diesem Produktionsziel basierenden Finanzprognosen, die in der oben genannten Pressemitteilung erwähnt werden, weiterhin gültig sind und sich nicht wesentlich geändert haben.

     

    Kupfer-Äquivalent: Bei Anwendung bezieht sich der Kupfer-Äquivalent auf Kupfer im produzierten Konzentrat oder im Konzentrat einer geplanten Produktion. Es bezieht sich nicht auf den Metallgehalt der Insitu Ressourcen, Vorräte oder Bohrergebnisse. Der Kupfer-Äquivalentgehalt wird für den entsprechenden Vorrat unter Berücksichtigung des Kupfergehalts aus allen Metallen (NSR) d. h. Kupfer, Zink, Gold und Silber berechnet.

     

     

    ÜBER ALTONA

     

    Altona Mining Limited (ASX: AOH) ist ein an der ASX notiertes Unternehmen, das finanziell gut aufgestellt ist und Dividenden zahlt. Altona konzentriert sich jetzt auf das Projekt Cloncurry in Queensland, Australien.

     

    Das Kupferprojekt Cloncurry beherbergt Ressourcen, die ungefähr 1,65 Mio. Tonnen Kupfer und 0,41 Mio. Unzen Gold enthalten. Die erste vorgesehene Entwicklung ist die Kupfer-Gold-Tagebaumine und Aufbereitungsanlage Little Eva mit einer Kapazität von 7 Mio. Tonnen pro Jahr.

     

    Little Eva ist genehmigt mit einer geplanten Jahresproduktion von 38.800 t Kupfer und 17.200 Unzen Gold über mindestens 11 Jahre. Eine endgültige Machbarkeitsstudie wurde im März 2014 veröffentlicht.

     

    Altona hat eine Rahmenvereinbarung mit Sichuan Railway Investment Group zur vollständigen Finanzierung und Entwicklung von Little Eva geschlossen.

     

    Die wichtigsten Zahlen Stand 31.12.2015;

     

    Ausgeg. Aktien:              534.800.592

    Ausgeg. Aktienrechte:              4.105.000

    Barmittel:              A$43,6M

    Aktienpreis:              11 Cent

    Marktkapitalisierung:              A$59M

     

    Altona Mining Limited

    ACN: 090 468 018

    Ground Floor, 1 Altona Street

    West Perth Western Australia 6005

     

    T:  +61 8 9485 2929

    E:  altona@altonamining.com

    W: www.altonamining.com

     

    ASX:               AOH

     

    Für weitere Informationen kontaktieren Sie bitte:                           

     

    Alistair Cowden             

    Managing Director             

    Tel: +61 8 9485 2929             

    altona@altonamining.com

     

    James Harris

    Professional Public Relations

    Tel: +61 8 9388 0944

    james.harris@ppr.com.au

                 

    Jochen Staiger

    Swiss Resource Capital AG - Germany

    Tel: +41 71 354 8501

    js@resource-capital.ch

     

     

    Für die Richtigkeit der Übersetzung wird keine Haftung übernommen! Bitte englische Originalmeldung beachten!

     

     

    Appendix 1: SRIG Confirmatory Drilling

     

    Part of the formal due diligence being undertaken by SRIG  included the drilling of two diamond drillholes at Little Eva and metallurgical testwork to validate the resource model and prior metallurgical recovery estimate. Metallurgical testwork is currently underway and drilling and assaying is complete.

     

    The two holes drilled by SRIG were twins of two pre-existing Altona drillholes (one Diamond and one RC). The holes tested mineralisation in the core of the deposit and the lower grade margin of the deposit. Results from the new holes compare well with prior holes given the variation within the deposit (Table 1) and provide further confidence in and confirmation of prior drilling.

     

    The distances between the SRIG holes and the twinned Altona holes varies from approximately 2 metres at the collar to 20 metres down hole.

     

    Table 1:  Comparison of Significant Intersections (at 0.3% copper cut-off grade)

     

    SRIG Twin Hole

    Original Altona Hole

    LED1006

    LED535

    From 0 metres:

    157 metres at 0.53% copper, 0.11g/t gold

    From 0 metres:

    156.7 metres at 0.57% copper, 0.07g/t gold

     

     

     

    LER521

     

    From 0 metres:

    157 metres at 0.45% copper, 0.06g/t gold

    LED1007

    LER261

    From 0 metres:

    228 metres at 0.18% copper, 0.03g/t gold

    From 0 metres:

    228 metres at 0.20% copper, 0.06g/t gold

     

    SRIG hole LED1006 extended past the end of the twinned hole LED535 and intersected other modelled mineralised zones.

     

    The results include the following highlights within broader mineralised zones:

     

    LED1006:               From 79 metres                            6 metres at 0.99% copper, 0.13 g/t gold

                  From 118 metres                            21 metres at 1.85% copper, 0.60g/t gold

                  From 222 metres                             8 metres at 1.66% copper, 0.28g/t gold

     

    LED1007:               From 43 metres                            5 metres at 2.38% copper, 0.28g/t gold

                 

    A full table of results and Altona’s standard sampling and assaying methodology are attached as Tables 2 to 4.

     


    Table 2:  Significant Diamond Drill Core Intersections (at 0.3% copper cut-off grade)

     

    Hole ID

            Depth

         Drill Intercept >0.3% Copper

    From

    To

    Width

    Copper

    Gold

    (metres)

    (metres)

    (metres)

    (%)

    (g/t)

    LED1006

    3

    12

    9

    0.48

    0.03

     

    41

    90

    49

    0.48

    0.06

     

    95

    105

    10

    0.62

    0.05

     

    118

    139

    21

    1.85

    0.6

     

    145

    186

    41

    0.41

    0.07

     

    192

    201

    9

    0.53

    0.15

     

    207

    230

    23

    0.76

    0.16

     

    238

    244

    6

    1.09

    0.33

     

     

     

     

     

     

    LED1007

    31

    48

    17

    1.05

    0.22

     

    96

    104

    8

    0.29

    0.06

     

    177

    182

    5

    0.29

    0.08

     

     

     

     

     

     

    Table 3:  Drillhole Summary Table

     

    Hole ID

    Hole Type

    Location (MGA54)

    Orientation

    End of Hole

    Easting

    Northing

    RL

    Azimuth

    Dip

    Depth

    (metres)

    (metres)

    (metres)

    (°)

    (°)

    (metres)

    SRIG Confirmatory Twin Holes - New

    LED1006

    Diamond

    410569.2

    7772193.0

    162.2

    81

    -59.2

    250.0

    LED1007

    Diamond

    410751.9

    7771867.8

    168.5

    80

    -60.0

    230.0

     

     

     

     

     

     

     

     

    Twinned Altona Resource Hole - Previous

    LED535

    Diamond

    410568.4

    7772195.6

    162.1

    81

    -60.0

    156.7

    LER521

    RC

    410565.7

    7772191.8

    161.8

    81

    -60.0

    217.0

    LER261

    RC

    410751.9

    7771869.3

    168.1

    81

    -60.0

    229.0

     

    Table 4:  Table 1 of the JORC Code

     

    Criteria

    Commentary

    Section 1:  Sampling Techniques and Data

    Sampling techniques

           Sampling was via diamond (DD) drill core. SRIG confirmation drilling core size was HQ. Core was measured and annotated for sampling by geologists contracted by SRIG (Mining One Pty Ltd) and independently validated by Altona staff on site. Core was cut and analysed at ALS laboratories in Townsville.  Half core was submitted for analysis; assay coarse reject and quarter core was sent for metallurgical testwork and remaining core retained and will be returned to Altona’s storage for reference.

    Drilling techniques

           Diamond drilling; all holes HQ core. SRIG confirmation drilling was triple tubed.

           Holes twinned were diamond and RC; results reported previously.

    Drill sample recovery

           Recovery was visually estimated and recorded. Core recoveries are considered to be excellent averaging well over 90%, generally 100%. Occasionally lower recoveries were recorded within the upper weathered zones.

           No significant changes in core recovery through the mineralised zones was recorded hence no subsequent bias to the grade.   

    Logging

           Logging of the SRIG holes was completed by independent contractor geologists for SRIG (and subsequently validated by Altona staff) using industry standard logging procedures   consistent Altona standard procedures.

           Logging is qualitative and quantitative including, colour, lithology, mineralisation, alteration, sulphide and oxide mineralogy, sulphide and oxide amount, texture, grain size and structure.

           All holes were logged in full.

    Sub-sampling techniques and sample preparation

           All samples were sent to ALS Laboratories in Townsville for cutting sample preparation and analysis. ALS is an independent commercial certified laboratory that uses industry standard sample preparation including drying, crushing and pulverisation.

           Half core was cut and submitted for analysis.

           Sample size is considered representative for typical copper mineralisation at Roseby area.     

    Quality of assay data and laboratory tests

           All samples were analysed at ALS laboratories in Townsville.

           Samples were analysed using an Aqua Regia digest (method code: GEO-AR01) followed by ICPAES and ICP-MS analysis for 41 elements (method code: ME-MS41). This included copper, with a detection limit of 0.2 ppm. Data reported from Aqua Regia digestion should be considered as representing only the leachable portion of a particular analyte.

           On return of copper values >1% a second series of analyses were undertaken. This involved an ore grade Aqua Regia digestion (method code: ASY-AR01) followed by ICPAES analysis, optimised for accuracy and precision at high concentrations (method code: ME-OG46).

           Gold was analysed via a fire assay (30g) with an AAS finish, with a lower detection limit of 0.01 ppm and upper detection limit of 100 ppm.

           Quality Control by SRIG included: standards (certified reference materials, according to Altona’s normal procedures, inserted into the sampling sequence at 1:20 ratio and included representative material for copper, gold and blanks; and field duplicates taken using a for every 20th sample. Laboratory checks were also carried out on sample pulps. The standards were inserted into each sample batch to test the accuracy of the laboratory analysis.

           As yet Altona has not received the data for independent review.

           No samples were analysed by an umpire laboratory.

           No geophysical tools were used to determine the results reported here.

    Verification of sampling and assaying

           Results were checked by several Altona personnel.

           The SRIG’s holes were twins of Altona resource definition holes.

           All field logging data was done on hardcopy with database entry by the SRIG contract geologist. The SRIG hole data was provide by SRIG to Altona for uploaded into the company Datashed database and validated by company database personnel.

           Drillhole assays were received in digital format from SRIG. Data was uploaded into the Altona Datashed database company database personnel. No manual data inserts took place.

           No adjustments have been applied to the results.

    Location of data points

           Collar locations have been surveyed using the companies own DGPS with approximately 0.1 metre accuracy.

           Down hole surveys were completed at the end of each hole within drill rods by Altona personnel using non-magnetic Gyro tool for azimuth and dip.

           The Grid is GDA94 MGA Zone 54.

           Elevation accuracy of DGPS survey is considered to be less than 0.5m and has been verified against detailed ground survey previously completed in the area.

    Data spacing and distribution

           Holes were largely drilled for confirmation/ due diligence purposes; one hole was drilled in the higher tenor Central Zone and one hole was drilled on the lower tenor margin of the Southern Zone.

           Drillholes being reported are from deposits with published resource estimate. Drill results are consistent with the existing drilling and resource estimate models.

    Orientation of data in relation to geological structure

           The strike of mineralisation is either approximately NW-SE to N-S with predominantly westerly dips, with the exception of Northern Domain at Little Eva which dips to the NE.

           No bias is considered to result from drilling direction.

           The holes at Little Eva were drilled on the same grid orientation as the deposit resource definition drillholes and were designed to intersect the mineralised zones at an optimal angle.

    Sample security

           Core samples were collected and stored in core trays in Altona facilities in Cloncury prior to the transport to Townsville. Packing and sampling was coordinated and supervised by SIG’s contractors.

           Following cutting by ALS, samples for analysis were collected into pre-numbered calico bags. Unique sample numbers were retained during the whole process.

    Audits or reviews

           No external audits or review have been undertaken.

    Section 2:  Reporting of Exploration Results

    Mineral tenement and land tenure status

             The Little Eva deposit is within Altona Mining’s 100% owned Cloncurry Project Mining Leases 90162, 90163, 90164, 90165, and 90166.

             Altona announced in 2015 a Framework Agreement with Sichuan Railway Investment Group (SRIG) which, if completed, will lead to the forming of a 60:40 SRIG/Altona JV within the Cloncurry Project.

           There are agreements in place with the native title holders, the Kalkadoon people and with landholders.

           No significant historic sites or national parks are located within the reported exploration sites.

           The Mining Leases were granted in late 2012 and are in good standing.

    Exploration done by other parties

           Extensive exploration programs and resource definition drilling has been carried out on the deposit by various companies commencing in the 1960’s; the majority of the work on the deposits was carried out by CRA Exploration,  Pasminco,  Universal Resources/Altona Mining and Xstrata.

    Geology

           The Little Eva deposit - breccia, disseminated and shear hosted copper-gold mineralisation styles typical of the IOCG deposits in the region e.g. Ernest Henry. The deposits are considered to be hydrothermal and structurally controlled, with the different styles reflecting host rocks (competency, chemistry and permeability).

           At Little Eva the majority of the mineralisation is sulphide (chalcopyrite) with a shallow (10-25m thick) weathered/oxidised cap.

    Drillhole Information

           Collar locations, elevations, azimuth, dip and lengths are presented in Table 3 of this release.

           Down hole widths of the mineralisation are presented in Table 2 of this release.

    Data aggregation methods

           Standard intercepts were calculated using a 0.3% copper cut-off typical to the Roseby area mineralisation. A minimum of 4m intercepts are reported here and a maximum of consecutive 4m of below 0.3% samples were allowed within each intercepts.

           No equivalent calculations have been applied or used.

    Relationship between mineralisation widths and intercept lengths

           At Little Eva drilling orientation is considered to be at a high angle or approximately perpendicular to the main orientation of the mineralisation resulting in unbiased widths.

    Diagrams

           Tables 1 and 3.

    Balanced reporting

           Best results for each hole have been reported in Table 1 including all significant results using the criteria described above. 

    Other substantive exploration data

           Not applicable.

    Further work

           Additional work in the future will consist of infill drilling for resource definition and mining grade control purposes.

     

     


    QUARTERLY REPORT DECEMBER 2015

    Table 1:  Resource Estimates for the Cloncurry Project

    DEPOSIT

    TOTAL

    CONTAINED

    METAL

    MEASURED

    INDICATED

    INFERRED

    Tonnes

    Grade

    Copper

    Gold

    Tonnes

    Grade

    Tonne

    Grade

    Tonnes

    Grade

    million

    Cu

    %

    Au

    g/t

    tonnes

    ounces

    million

    Cu

    %

    Au

    g/t

    million

    Cu

    %

    Au

    g/t

    million

    Cu

    %

    Au

    g/t

    COPPER GOLD DEPOSITS

    Little Eva

    105.9

    0.52

    0.09

    546,000

    295,000

    37.1

    0.60

    0.09

    45.0

    0.46

    0.08

    23.9

    0.50

    0.10

    Ivy AnnA

    7.5

    0.57

    0.07

    43,000

    17,000

    -

    -

    -

    5.4

    0.60

    0.08

    2.1

    0.49

    0.06

    Lady ClayreA

    14.0

    0.56

    0.20

    78,000

    85,000

    -

    -

    -

    3.6

    0.60

    0.24

    10.4

    0.54

    0.18

    BedfordA

    1.7

    0.99

    0.20

    17,000

    11,000

    -

    -

    -

    1.3

    1.04

    0.21

    0.4

    0.83

    0.16

        Sub-total

    129.1

    0.53

    0.10

    684,000

    409,000

    37.1

    0.60

    0.09

    55.3

    0.49

    0.09

    36.7

    0.51

    0.12

    COPPER ONLY DEPOSITS

     

     

     

     

     

     

     

     

    BlackardA

    76.4

    0.62

     

    475,000

    -

    27.0

    0.68

     -

    6.6

    0.60

     -

    42.7

    0.59

    -

    ScanlanA

    22.2

    0.65

     

    143,000

    -

    -

    -

     -

    18.4

    0.65

     -

    3.8

    0.60

    -

    Turkey Creek

    21.0

    0.59

     

    123,000

    -

    -

    -

     -

    17.7

    0.59

     -

    3.4

    0.58

    -

    LongamundiA

    10.4

    0.66

     

    69,000

    -

    -

    -

     -

    -

    -

     -

    10.4

    0.66

    -

    LegendA

    17.4

    0.54

     

    94,000

    -

    -

    -

     -

    -

    -

     -

    17.4

    0.54

    -

    Great SouthernA

    6.0

    0.61

     

    37,000

    -

    -

    -

     -

    -

    -

     -

    6.0

    0.61

    -

    CarolineA

    3.6

    0.53

     

    19,000

    -

    -

    -

     -

    -

    -

     -

    3.6

    0.53

    -

    Charlie BrownA

    0.7

    0.40

     

    3,000

    -

    -

    -

     -

    -

    -

     -

    0.7

    0.40

    -

        Sub-total

    157.7

    0.61

     

    963,000

    -

    27.0

    0.68

     -

    42.7

    0.62

     -

    88.1

    0.59

    -

    TOTAL

    286.8

    0.57

    0.04

    1,647,000

    409,000

    64.1

    0.63

    0.05

    98.0

    0.55

    0.05

    124.8

    0.57

    0.04

    This information was prepared and first disclosed under the JORC Code 2004 Edition. It has not been updated since to comply with the JORC Code 2012 on the basis that the information has not materially changed since it was last reported. All other resources classified and reported in accordance with JORC Code 2012 edition.

    Note: Tonnages are dry metric tonnes and have been rounded, hence small differences may be present in the totals.

    See ASX release of 23 October 2007 and 26 July 2011 (Longamundi, Great Southern, Caroline and Charlie Brown), 23 April 2012 (Bedford, Ivy Ann and Lady Clayre), 03 July 2012 (Blackard and Scanlan), 22 August 2012 (Legend), 27 May 2014 (Little Eva) and 18 March 2015 (Turkey Creek) for full details of resource estimation.  Little Eva is reported above a 0.2% copper lower cut-off grade, all other deposits are above 0.3% lower copper cut-off grade.

     

                  13.


    QUARTERLY REPORT DECEMBER 2015

    The ASX releases referenced in Table 1 are available on the Altona website at www.altonamining.com.  The Company confirms that it is not aware of any new information or data that materially affects the information included in the most recent market announcement for each deposit and, in the case of Mineral Resources and Ore Reserves, that all material assumptions and technical parameters underpinning the estimates in the relevant market announcement continue to apply and have not materially changed.  The Company confirms that the form and context in which the Competent Person’s findings are presented have not materially modified from the original market announcement.

     

                  19.


    QUARTERLY REPORT DECEMBER 2015

     

    APPENDIX 5B

    Mining Exploration entity quarterly report

     

    Name of entity

    ALTONA MINING LIMITED

     

    ABN                            Quarter ended (“current quarter”)

    35 090 468 018

     

    31 December 2015

     

    Consolidated statement of cash flows

     

     

    Cash flows related to operating activities

     

    Current Quarter

    (3 months)

    A$’000

    Year to Date

    (6 months)

    $A’000

    1.1              Receipts from product sales and related debtors

                  -

                  -

     

     

     

    1.2              Payments for              (a)              exploration and evaluation

                  (676)

                  (2,034)

                                              (b)              development

                  -

                  -

                                              (c)              production

                  -

                  -

                                              (d)              administration and corporate activities

                  (945)

                  (1,752)

    1.3              Dividends received

                  -

                  -

    1.4              Interest and other items of a similar nature received

                  224

                  547

    1.5              Interest and other costs of finance paid

                  (2)

                  (3)

    1.6              Income taxes rebate

                  -

                  -

    1.7              Other*

                  (10)

                  (8)

     

     

     

                  Net Operating Cash Flows

                  (1,409)

                  (3,250)

                  Cash flows related to investing activities

     

     

    1.8              Payment for purchases of:              (a)              prospects

                  -

                  -

                                              (b)              equity investments

                  -

                  -

                                              (c)              other fixed assets

                  -

                  -

    1.9              Proceeds from sale of:              (a)              prospects

                  -

                  -

                                              (b)              equity investments

                  -

                  -

                                              (c)              other fixed assets

                  -

                  -

    1.10              Loans to other entities

                  -

                  -

    1.11              Loans repaid by other entities

                  -

                  -

    1.12              Other

                  -

                  -

                  Net investing cash flows

                  -

                  -

    1.13              Total operating and investing cash flows (carried forward)

                  (1,409)

                  (3,250)

     

    * Includes VAT/GST.


                  Cash flows related to financing activities

     

     

    1.14              Proceeds from issues of shares (net of costs)

                  -

                  -

    1.15              Proceeds from sale of forfeited shares

                  -

                  -

    1.16              Proceeds from borrowings

                  -

                  -

    1.17              Repayment of borrowings

                  -

                  -

    1.18              Dividends paid

                  -

                  -

    1.19              Other

                  -

                  -

                  Net financing cash flows

                  -

                  -

                  Net increase (decrease) in cash held

                  (1,409)

                  (3,250)

    1.20              Cash at beginning of quarter/year

                  45,017

                  46,838

    1.21              Exchange rate adjustments to 1.20

                  (13)

                  7

    1.22              Cash at end of quarter

    43,595

    43,595

     

     

    Payments to directors of the entity and associates of the directors

    Payments to related entities of the entity and associates of the related entities

     

    Current quarter

    $A’000

    1.23              Aggregate amount of payments to the parties included in item 1.2

     

    185

    1.24              Aggregate amount of loans to the parties included in item 1.10

     

    -

     

    1.25              Explanation necessary for an understanding of the transactions

     

    Payment of executive and non-executive directors’ fees, salaries and superannuation.

     

     

    Non-cash financing and investing activities

     

    2.1              Details of financing and investing transactions which have had a material effect on consolidated assets and liabilities but did not involve cash flows

     

    N/A

     

    2.2         Details of outlays made by other entities to establish or increase their share in projects in which the reporting entity has an interest

     

    N/A


    Financing facilities available

     

    Add notes as necessary for an understanding of the position.

     

     

    Amount available

    $A’000

    Amount used

    $A’000

    3.1              Loan facilities

    -

    -

    3.2              Credit standby arrangements

    -

    -

     

     

    Estimated cash outflows for next quarter (excluding any proceeds from concentrate sales and other income)

     

     

    $A’000

    4.1              Evaluation/Exploration

    1,061

    4.2     Development

    -

    4.3     Production

    -

    4.4     Administration and corporate activities

    849

                  Total

    1,910

     

     

    Reconciliation of Cash

     

    Reconciliation of cash at the end of the quarter (as shown in the consolidated statement of cash flows) to the related items in the accounts is as follows.

    Current

    quarter

    $A’000

    Previous quarter

    $A’000

    5.1              Cash on hand and at bank

                  300

                  342

    5.2              Deposits at call

                  43,295

                  44,675

    5.3              Bank overdraft

                  -

                  -

    5.4              Other (provide details)

                  -

                  -

                  Total: cash at end of quarter (item 1.22)

                  43,595

                  45,017

     

     

    Changes in interests in mining tenements

    6.0              See attached Schedule A.


    Issued and quoted securities at end of current quarter

     

     

    Total number

    Number quoted

    Issue price per security

    Amount paid up per security

    7.1              Preference

                  securities

                  (description)

     

    -

    -

    -

    -

    7.2          Changes during

                  quarter

     

    -

    -

    -

    -

    7.3              Ordinary

                  securities

     

    534,800,592

    534,800,592

    -

    -

    7.4              Changes during

                  quarter

                  -  Issued

     

    -

    -

    -

    -

    7.5          Converting debt

                  Securities

                  (description and

                  conversion factor)

     

    -

    -

    -

    -

    7.6          Changes during

                  quarter

     

    -

    -

    -

    -

    7.7          Options

                  (description and

                  conversion factor)

     

     

     

    4,105,000^

     

     

     

    -

     

     

     

    -

     

     

     

    -

     

    7.8              Issued during               quarter

     

    -

    -

    -

    -

    7.9              Exercised during

                  quarter

     

    -

    -

    -

    -

    7.10              Expired during

                  quarter

     

    750,000^

    -

     

    -

     

     

    -

     

    7.11              Debentures

                  (totals only)

     

    -

    -

    -

    -

    7.12              Unsecured notes

                  (totals only)

    -

    -

    -

    -

     

    ^               Share rights issued pursuant to approved Employee Share Scheme. These Share Rights form part of the Long Term Incentive Scheme in compliance with Altona’s Remuneration Policy. The Share Rights have various expiry dates and performance hurdles.

     


    Compliance statement

     

    1.             This statement has been prepared under accounting policies which comply with accounting standards as defined in the Corporations Act or other standards acceptable to ASX.

     

    2.             This statement does give a true and fair view of the matters disclosed.

     

     

     

     

     

    Sign here:                            Date: 29 January 2016

     

    Company Secretary

     

    Print Name:              Eric Hughes

     


    SCHEDULE A

     

    AUSTRALIAN MINING TENEMENTS

     

    Interests in mining tenements relinquished, reduced or lapsed during the quarter

     

    Conditionally surrendered in favour of new tenements: EPMs 8506, 10266, 12529, 14822, 8059, 12121, 12492, 12493, 13249, 14556, 18784, 18983, 9056, 14365, 14535, 10833, 11004 and 11611.

     

    Interests in mining tenements acquired or increased during the quarter

     

    New tenements replacing conditionally surrendered EPM’s:  EPMs 25757, 25760, 25759, 25761.

     

    Interests in mining tenements at end of the quarter

     

    The area under granted EPMs within Queensland presently totals 1252.3 km².

     

    Cloncurry Project:  Mining Leases (ML)

    Number

    Name

    Holder

    Beneficial

    Interest

    Held

    90162

    Scanlan

    Altona Mining Ltd / Roseby Copper Pty Ltd

    100%

    90163

    Longamundi

    Altona Mining Ltd / Roseby Copper Pty Ltd

    100%

    90164

    Blackard

    Altona Mining Ltd / Roseby Copper Pty Ltd

    100%

    90165

    Little Eva

    Altona Mining Ltd / Roseby Copper Pty Ltd

    100%

    90166

    Village

    Altona Mining Ltd / Roseby Copper Pty Ltd

    100%

     

    Exploration Permit for Minerals (EPM) Cloncurry Project

     

    Number

    Name

    Holder

    Beneficial

    Interest Held

    9611

    Happy Valley

    Roseby Copper (South) Pty Ltd

    100%

    14363

    Bannockburn

    Roseby Copper Pty Ltd

    100%

    14370

    Malakoff

    Roseby Copper (South) Pty Ltd

    100%

    14371

    Mt. Angelay

    Roseby Copper (South) Pty Ltd

    100%

    25757

    Burke

    Roseby Copper Pty Ltd

    100%

    25760

    King

    Roseby Copper Pty Ltd

    100%

     

    Exploration Permit for Minerals (EPM) Roseby South Project

     

    Number

    Name

    Holder

    Beneficial

    Interest Held

    25761

    Wills

    Roseby Copper (South) Pty Ltd

    100%

    25759

    Gray

    Roseby Copper (South) Pty Ltd

    100%

     

    Finnish Projects

    Mining Licences/Mining Permits

    Number

    Name

    Holder

    Beneficial

    Interest Held

    K7802

    Hautalampi

    Vulcan Hautalampi Oy

    100%

    KL2015:0004

    Särkiniemi

    Vulcan Kotalahti Oy

    100%

     

     

     

                  19.



    BSN Podcasts
    Christian Drastil: Wiener Börse Plausch

    SportWoche Podcast #106: Persönliches Fail-Fazit VCM und Staatsmeisterin Carola Bendl-Tschiedel über Rekordlerin Julia Mayer




     

    Aktien auf dem Radar:Immofinanz, Polytec Group, Marinomed Biotech, Flughafen Wien, Warimpex, Lenzing, AT&S, Strabag, Uniqa, Wienerberger, Pierer Mobility, ATX, ATX TR, VIG, Andritz, Erste Group, Semperit, Cleen Energy, Österreichische Post, Stadlauer Malzfabrik AG, Addiko Bank, Oberbank AG Stamm, Agrana, Amag, CA Immo, EVN, Kapsch TrafficCom, OMV, Telekom Austria, Siemens Energy, Intel.


    Random Partner

    Palfinger
    Palfinger zählt zu den international führenden Herstellern innovativer Hebe-Lösungen, die auf Nutzfahrzeugen und im maritimen Bereich zum Einsatz kommen. Der Konzern verfügt über 5.000 Vertriebs- und Servicestützpunkte in über 130 Ländern in Europa, Nord- und Südamerika sowie Asien.

    >> Besuchen Sie 68 weitere Partner auf boerse-social.com/partner


    Useletter

    Die Useletter "Morning Xpresso" und "Evening Xtrakt" heben sich deutlich von den gängigen Newslettern ab. Beispiele ansehen bzw. kostenfrei anmelden. Wichtige Börse-Infos garantiert.

    Newsletter abonnieren

    Runplugged

    Infos über neue Financial Literacy Audio Files für die Runplugged App
    (kostenfrei downloaden über http://runplugged.com/spreadit)

    per Newsletter erhalten


    Meistgelesen
    >> mehr





    PIR-Zeichnungsprodukte
    AT0000A39UT1
    AT0000A2U2W8
    AT0000A347X9
    Newsflow
    >> mehr

    Börse Social Club Board
    >> mehr
      BSN Vola-Event Siemens Energy
      #gabb #1589

      Featured Partner Video

      MMM Matejkas Market Memos #35: Gedanken über Europa, das man besuchen sollte, solange es noch steht

      Herzlich willkommen zu Triple M - Matejkas Market Memos Donnerstags auf Audio CD at. Heute macht sich Wolfgang Matejka Gedanken über Geier Sturzflug, die 1983 meinten, dass man Europa besuchen sol...

      Books josefchladek.com

      Eron Rauch
      Heartland
      2023
      Self published

      Sergio Castañeira
      Limbo
      2023
      ediciones anómalas

      Futures
      On the Verge
      2023
      Void

      Horst Pannwitz
      Berlin. Symphonie einer Weltstadt
      1959
      Ernst Staneck Verlag

      Tommaso Protti
      Terra Vermelha
      2023
      Void